Get the look of real poured concrete slabs with these lightweight, faux concrete wall panels in the color Industrial Grey. Industrial Grey panels offer a light grey concrete look that will brighten up any space with its cooler hues.

UrbanConcrete panels are made from pouring high-density polyurethane into a mold that was cast from a real concrete panel. This process gives UrbanConcrete the truly authentic look of a real poured concrete panel.

48" x 48" panels cover 16 square feet and are available in two style profiles: Flat, which gives a smooth finish, and Circles, which creates the look of anchor holes. These 48” x 48” panels are available in one thickness, a 1” thick panel.

These 1" thick panels have a tongue-and-groove design, making them exceptionally easy to install and only require a bit of caulking to create a clean, finished look.

These panels are extremely lightweight and are simply screwed onto the wall. No need for intense labor or reinforcement of walls like with typical concrete wall! Panels are cut with a normal wood saw blade. All that is required for install are a few simple tools and a few hours.

**Note: The images we display have the most accurate color possible. However, due to differences in computer monitors, there may be variations in color between the actual product and your screen. It is always recommended to order a sample to confirm exact coloration.

1" Thick Install Sheet

1/2" Thin Install Sheet
Warranty
Spec Data
Care and Cleaning

VOC Emission Test Certificate

Material: High density polyurethane

Class A Fire rated: Yes

Exterior rated: No 

24x48x1/2"

Panel size: ~24" H x 48" W

Panel thickness: ~1/2” 

Square feet per panel: 8

Weight: Approximately .5 lbs per square foot

24x48x1"

Panel size: ~4" H x 48" W

Panel thickness: ~1” 

Square feet per panel: 8

Weight: Approximately 1 lb per square foot

48x48x1"

Panel size: ~48" H x 48" W

Panel thickness: ~1” 

Square feet per panel: 16

Weight: Approximately 1 lb per square foot

*Dimensions can vary due to panel design & molding process. Expect variation of approx. 1/16” or more.

Read UrbanConcrete FAQs here.